Etek5
- recoil101
- Will hier nur verkaufen
Beitrag
Etek5
ETEK 5 premiere at World Cup
Bildquelle: http://i.imgur.com/ZWuVk8j.jpg
Etek5 Specs:
The ETEK line has always stood for durability and reliability. Now in its 5th generation, the New ETEK5 holds true to those same basic principles. It utilizes the finest materials wrapped up in a package that offers outstanding performance, class-leading ergonomics and an array of features that make it a formidable proposition at its price point. It pushes the boundaries of what has come to be expected from a mid-range marker.
The ETEK5 has achieved this by using the trickle-down effect of features and ergonomics from its class-leading high-end siblings. For example, the ETEK5 borrows its basic architecture and form from the incredible EGO LV1. Its integrated LPR assembly and SL4 inline regulator ensure the ETEK5 operates with exceptional consistency whilst employing an extended pitch between the foregrip and gripframe, providing the most stable and comfortable shooting platform possible. The all-new dual-density wrap-around grips and foregrips not only look the business, but also use our latest stippled inserts to give the user a higher level of grip and control, regardless of playing conditions. The ETEK5 points accurately and naturally whether snap-shooting or running and gunning.
Internally, the ETEK5 now incorporates Zick3 technology which introduces a true 2-stage acceleration profile. This provides a very gentle initial acceleration to the bolt and ball which then increases during the 2nd stage of the bolt stroke to enable super-fast rates of fire. It enables the ETEK5 to be more gentle on paint whilst also reducing recoil.
On top of that, the ETEK5 operates at much lower pressures compared to previous ETEK models. The much larger valve chamber combines with the high-flow valve and new soft-tip Cure5 bolt to deliver an HPR operating pressure of around 150psi and an LPR pressure of 85psi. The result is a quieter, smoother shot as well as having the added benefit of being more gentle on paint both in the breech and in the barrel.
As standard the ETEK5 uses its crisp, multi-coloured LED system to indicate the current state of the marker. Firing modes and parameters are easily accessed and adjusted via the LED using combinations of button presses and trigger pulls.
For those wanting to take things a step further, the ETEK5 has the option of a graphical user interface through the OLED display upgrade.*
Please note: the OLED display is an additional upgrade item. The ETEK5 does NOT ship with the OLED as standard.
For the first time on any marker, the ETEK5 allows the user to plug this OLED board directly onto the existing standard circuit board without the need for any additional upgrades, such as frames, grips or even the circuit board itself.
This quick and easy to install upgrade gives the user an instant rear-mounted graphical display that sits within the existing window at the rear of the frame.
The OLED upgrade empowers the user to quickly and easily adjust the marker control parameters, such as firing mode, dwell and also to monitor breech sensor status, battery level, shot count and the actual rate of fire in real-time. Semi and ramping firing modes are fully configurable to comply with the requirements of every major paintball league.
The ETEK5 continues the platform’s recent success of combining advanced lightweight and durable composites in core areas of the marker. Failure rates in areas such as the gripframe currently stand at less than 0.05% for all ETEK3/4 models ever produced proving time and again that these incredibly tough components are capable of resisting any and all kinds of abuse thrown at them. They are more than up to the job of carrying the Eclipse name for reliability in any condition.
Welcome. To the 5th dimension.
Features
Weight: 1000g / 2.2lb (inc Barrel, Battery, Feed Tube, OOPS)
Length/Height/Width: 552mm (inc Barrel) / 215mm / 31mm
Interface: Single push button and trigger
Display: LED or optional 32x128 graphical OLED
Solenoid: SMC with custom direct mount manifold
Processor: PIC16F1829 XLP (Extreme Low Power) microcontroller
Power Supply: 1 x 9v Alkaline battery (IEC 6LR61 / ANSI 1604A)
E-Portal: Not compatible
ASA Mount: Bolted to frame
Trigger Method: Micro-switch
Trigger Pivot: Sintered brass bushes
Barrel: 2-Piece Micro Honed ETEK5 14.5” length 0.693” Bore (Shaft4 compatible)
Feed Tube: Lever operated Clamping Feed
Materials: 6061-T6 Aluminium and Glass Reinforced Nylon
Operating Principle: Stacked Tube Poppet
Drive Mechanism: Zick3 Rammer kit
Bolt Mechanism: Cure Bolt with GSL soft tip
Bildquelle: http://i.imgur.com/ZWuVk8j.jpg
Etek5 Specs:
The ETEK line has always stood for durability and reliability. Now in its 5th generation, the New ETEK5 holds true to those same basic principles. It utilizes the finest materials wrapped up in a package that offers outstanding performance, class-leading ergonomics and an array of features that make it a formidable proposition at its price point. It pushes the boundaries of what has come to be expected from a mid-range marker.
The ETEK5 has achieved this by using the trickle-down effect of features and ergonomics from its class-leading high-end siblings. For example, the ETEK5 borrows its basic architecture and form from the incredible EGO LV1. Its integrated LPR assembly and SL4 inline regulator ensure the ETEK5 operates with exceptional consistency whilst employing an extended pitch between the foregrip and gripframe, providing the most stable and comfortable shooting platform possible. The all-new dual-density wrap-around grips and foregrips not only look the business, but also use our latest stippled inserts to give the user a higher level of grip and control, regardless of playing conditions. The ETEK5 points accurately and naturally whether snap-shooting or running and gunning.
Internally, the ETEK5 now incorporates Zick3 technology which introduces a true 2-stage acceleration profile. This provides a very gentle initial acceleration to the bolt and ball which then increases during the 2nd stage of the bolt stroke to enable super-fast rates of fire. It enables the ETEK5 to be more gentle on paint whilst also reducing recoil.
On top of that, the ETEK5 operates at much lower pressures compared to previous ETEK models. The much larger valve chamber combines with the high-flow valve and new soft-tip Cure5 bolt to deliver an HPR operating pressure of around 150psi and an LPR pressure of 85psi. The result is a quieter, smoother shot as well as having the added benefit of being more gentle on paint both in the breech and in the barrel.
As standard the ETEK5 uses its crisp, multi-coloured LED system to indicate the current state of the marker. Firing modes and parameters are easily accessed and adjusted via the LED using combinations of button presses and trigger pulls.
For those wanting to take things a step further, the ETEK5 has the option of a graphical user interface through the OLED display upgrade.*
Please note: the OLED display is an additional upgrade item. The ETEK5 does NOT ship with the OLED as standard.
For the first time on any marker, the ETEK5 allows the user to plug this OLED board directly onto the existing standard circuit board without the need for any additional upgrades, such as frames, grips or even the circuit board itself.
This quick and easy to install upgrade gives the user an instant rear-mounted graphical display that sits within the existing window at the rear of the frame.
The OLED upgrade empowers the user to quickly and easily adjust the marker control parameters, such as firing mode, dwell and also to monitor breech sensor status, battery level, shot count and the actual rate of fire in real-time. Semi and ramping firing modes are fully configurable to comply with the requirements of every major paintball league.
The ETEK5 continues the platform’s recent success of combining advanced lightweight and durable composites in core areas of the marker. Failure rates in areas such as the gripframe currently stand at less than 0.05% for all ETEK3/4 models ever produced proving time and again that these incredibly tough components are capable of resisting any and all kinds of abuse thrown at them. They are more than up to the job of carrying the Eclipse name for reliability in any condition.
Welcome. To the 5th dimension.
Features
Weight: 1000g / 2.2lb (inc Barrel, Battery, Feed Tube, OOPS)
Length/Height/Width: 552mm (inc Barrel) / 215mm / 31mm
Interface: Single push button and trigger
Display: LED or optional 32x128 graphical OLED
Solenoid: SMC with custom direct mount manifold
Processor: PIC16F1829 XLP (Extreme Low Power) microcontroller
Power Supply: 1 x 9v Alkaline battery (IEC 6LR61 / ANSI 1604A)
E-Portal: Not compatible
ASA Mount: Bolted to frame
Trigger Method: Micro-switch
Trigger Pivot: Sintered brass bushes
Barrel: 2-Piece Micro Honed ETEK5 14.5” length 0.693” Bore (Shaft4 compatible)
Feed Tube: Lever operated Clamping Feed
Materials: 6061-T6 Aluminium and Glass Reinforced Nylon
Operating Principle: Stacked Tube Poppet
Drive Mechanism: Zick3 Rammer kit
Bolt Mechanism: Cure Bolt with GSL soft tip
Zuletzt geändert von recoil101 am 22.10.2014 12:23, insgesamt 1-mal geändert.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- CRiS
- Nogarator
- Wohnort: Herne
- ForumBadges:
- FrankL
- Rookie
- Wohnort: Nürnberg
Beitrag
Macroline und Gummireg schauen in Kombination irgendwie seltsam aus
Bin gespannt, ob das LeverValve jetzt auch in der Mittelklasse angekommen ist.
Bin gespannt, ob das LeverValve jetzt auch in der Mittelklasse angekommen ist.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- Bao
- Rec-Baller
Beitrag
also ich finde sie, abgesehen von dem ASA, recht gelungen
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- xgambitx
- Teilzeitarschloch
- Wohnort: Reichenbach
Beitrag
Schicke Knarre...wird sicher wieder ein Verkaufsschlager!!! :hallo:
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- Jackman33
- Rookie
- Wohnort: Trebbin
- seashore
- Rec-Baller
- Wohnort: Koblenz
Beitrag
Schade, dass es noch eine macroline gibt. Ansonsten wäre es ne schöne Backup Knifte. Ich bin auf die neuen Ethas und einen lv1 Nachfolger gespannt und hatte eigentlich gedacht, dass die etek 5 keine Macroline mehr hat
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- icp-ms
- Rain Man
- ForumBadges:
- XtraBadges: zeigen
Beitrag
Warum soll eine Kanone die preislich unter dem highend Niveau ist, besser ausgestattet sein als die ego?
Darum hat sie macroline
Und darum wird sie auch keinen Lever Hebel haben.
Das würde sie zu nah an die ego bringen.
Darum hat sie macroline
Und darum wird sie auch keinen Lever Hebel haben.
Das würde sie zu nah an die ego bringen.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- Vortexics
- Podbitch
Beitrag
und der LPR verschwindet im body, sieht gut aus^^
täuschts mich oder hat der grip am reg mehr "konturen" als der der LV1??
täuschts mich oder hat der grip am reg mehr "konturen" als der der LV1??
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- BillyTheKid
- Sith-Lord
- Wohnort: Heinsberg
- Trusted Seller:
- ForumBadges:
- XtraBadges: zeigen
Beitrag
Zudem sieht das Reg-Gummi einteilig aus.
PE hat wohl auf die Kunden gehört die sich beschwert haben das er sich bei der LV1 verdreht.
PE hat wohl auf die Kunden gehört die sich beschwert haben das er sich bei der LV1 verdreht.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- VandeerPipe
- Will hier nur verkaufen
- Wohnort: Schaffhausen CH
Beitrag
Dann nimm ne DP Fusion Elite dann haste keine Macroline mehr... Aber da kommt dann wieder das Thema "Probleme " auf und der schlechte Ruf hält sich hartnäckig...seashore hat geschrieben:Schade, dass es noch eine macroline gibt. Ansonsten wäre es ne schöne Backup Knifte. Ich bin auf die neuen Ethas und einen lv1 Nachfolger gespannt und hatte eigentlich gedacht, dass die etek 5 keine Macroline mehr hat
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- sidd129
- Rec-Baller
- Wohnort: Siegen
Beitrag
Mir gefällts, obwohl ich auch mal eher auf eine Etha 2 gespannt wäre...
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- niedersachse0815
- Semi
- seashore
- Rec-Baller
- Wohnort: Koblenz
- R3C
- Will hier nur verkaufen
- Wohnort: Eberswalde
- LeahCim
- Mugger
Beitrag
Das Teil zieht bestimmt viele Spooler Spieler an die man wieder nen Rammer haben wollen...reizt mich zumindest!
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- seashore
- Rec-Baller
- Wohnort: Koblenz
Beitrag
Wat für nen Spooler spielst du denn, dass du von ner Etek angezogen wirst? *und weg* ;-)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- das_tommY
- Moderator
- Wohnort: Monheim
- ForumBadges:
Beitrag
Ich denke Leah hat sich auf das Handling der Etek bezogen, da diese ja einen innenliegenden LPR genau wie die EGO LV1 hat.seashore hat geschrieben:Wat für nen Spooler spielst du denn, dass du von ner Etek angezogen wirst? *und weg* ;-)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- Bao
- Rec-Baller
Beitrag
etek war ja immer en guter Markierer aber halt echt laut :-/
ich denke, dass daran nichts geändert wurde - wie bei allen anderen eteks
ich denke, dass daran nichts geändert wurde - wie bei allen anderen eteks
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- MrTea91
- Podbitch
- Wohnort: Köln
- seashore
- Rec-Baller
- Wohnort: Koblenz
Beitrag
Das würde mich dann sehr verwirren. Display an der Etei, aber noch immer ne Macroline, obwohl es ohne Mehraufwand ohne geht? Ne, das passt nicht
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- LeahCim
- Mugger
Beitrag
Und ja, ich meine die Leute, die auch mal was anderes spielen wollen wie ne LV1 aber keine Lust haben 2 Highend Knipsen zu besitzen. Wenn ich Spooler spiele, dann brauche ich keinen No-Kick Rammer.
Ich spiele ne Geo 2 :hallo:seashore hat geschrieben:Wat für nen Spooler spielst du denn, dass du von ner Etek angezogen wirst? *und weg* ;-)
Und ja, ich meine die Leute, die auch mal was anderes spielen wollen wie ne LV1 aber keine Lust haben 2 Highend Knipsen zu besitzen. Wenn ich Spooler spiele, dann brauche ich keinen No-Kick Rammer.
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- Jackman33
- Rookie
- Wohnort: Trebbin
Beitrag
Etek war schon immer nur eine abgespeckte Ego und das wird auch so bleiben, es wird kein LCD-Display geben, ich denke mal der Marcoline wird bei der nächsten Generation verschwinden.
Aber ich denke mal Sie wird viele Kunden finden und die Frage Rammer oder Spooler ist eine reine Geschmackssache.
Ich bin ehrlich und ich bin Rammer - Fan und kann mit einen Spooler nichts anfangen, aber trotzdem ballern die Highend-Guns auf hohem Niveau --> auch Etha und Etek
Aber ich denke mal Sie wird viele Kunden finden und die Frage Rammer oder Spooler ist eine reine Geschmackssache.
Ich bin ehrlich und ich bin Rammer - Fan und kann mit einen Spooler nichts anfangen, aber trotzdem ballern die Highend-Guns auf hohem Niveau --> auch Etha und Etek
Link: | |
BBcode: | |
HTML: | |
Hide post links |
- HighTEC
- Mugger
- Wohnort: Komme vom Feld
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste