As a reminder, please make sure to maintain your HPA regulator. Just like oil changes on a car, preventative maintenance can go a long way. Ninja recommends that you take apart your regulator, clean all of the internal parts and the inside of the bottom and top half of your regulator, inspect your orings and as long as everything looks good, apply Ninja lube or any silicone-based grease and you...r regulator should continue to work just like it did when it was brand new. The picture above shows a regulator that was never maintained. What you see is a blade of grass inside of the regulator. This is also a reason why you use fill nipple covers (to prevent foreign debris from entering through the fill nipple port)
Ein Presetregulator (alle, nicht nur der Ninja) sollten 1-2mal pro Jahr gewartet werden.the pin valve seat is a 006-TFSS. The two larger piston orings are 012-90u or 012-70B. the smaller piston oring is a 008-90U
Dazu schraubt man den Preset Regulator von der Drucklosen Flasche ab.
Öffnet ihn und befreit ihn von altem Fett und Schmutz.
Danach alle Oringe mit Silikon basierten Fett einfetten.
So hat man lange Freude an seinem Preset Regulator.
warnung: die wartung erfolgt auf eigene verantwortung. das pbhub.de übernimmt keine haftung für evtl. fehlwartungen oder defekte