eigene Beiträge| neueste Beiträge| ungelesene Beiträge| unbeantwortete Beiträge| aktive Themen| Fördermitgliedschaft| Cockerpage

Neues E-/ X-mag Board

Alles was oben nicht aufgeführt ist.
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

Neues E-/ X-mag Board

#1

26.07.2011 08:14

Für die E-/X-mag gibt es bald ein neues Board.
Für alle denen der xmod nicht mehr aktuell genug ist.

Bild
New E-Mag/X-Mag board

Yes,.. you read that correctly!

We are going to make a new board for the E-Mag and X-Mag

This will be a completely new board that will replace the no longer available OEM boards

The board will be a “drop in replacement” product

We are going to make some changes to the current design to make it more up to date

We are looking to support some of the following features:
The ACE board
Break Beam/Bounce Beam Eye Systems
HES trigger
Use the rear button as a power switch
Use the rear button as a mode/eye switch
Multi-color LED (no LED Screen)
Warp Feed Port
Solenoid Port
Power Port
Solenoid Polarity Correction
RF Hopper link

We are looking to make 100 boards in the first run

We are still working on a price. It looks to be $150+
the new boards will be able to hit a CPS rate of 50
Im Moment macht der Ramping Code noch Probleme, in 2 Monaten soll das Ganze finalisiert werden

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#2

26.07.2011 10:45

Geil! :D

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
quad-damage
Rec-Baller
Rec-Baller
Beiträge: 389
Registriert: 28.11.2004 22:03

#3

27.07.2011 19:17

Sieht in der Übersicht wie ein Gipsfuß aus ... ;-)

Link:
BBcode:
HTML:
Hide post links
Show post links
DrRT
Podbitch
Podbitch
Beiträge: 113
Registriert: 11.08.2009 03:09

#4

27.07.2011 19:58

Ist aber ein flinker Gipsfuss!

Gibt nicht viele Marker, für welche fast zehn Jahre nach Erscheinen noch ein neues Board aufgelegt wird. :rock:

Link:
BBcode:
HTML:
Hide post links
Show post links
ASX05
Podbitch
Podbitch
Beiträge: 168
Registriert: 06.02.2007 14:07

#5

29.07.2011 14:53

wer baut das ? haben will !!! :hurra:

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#6

28.09.2011 08:12

Bild

noch etwa zwei wochen, dann wirds konkreter

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#7

05.10.2011 07:52

NOTICE
For those of you that have X-mags or E-mags with milling to support the ACE board, the new ACE boards WILL be completed next.

You can not use an AGD ACE board with the new main boards I am releasing.

The idea is to allow you to have all the critical components as well as power control on a single unit rather than splitting it into two boards.

In simple terms, you will be removing everything from the frame except the solenoid plunget and sear and saving them
You will be installing brand new parts (HES, solenoid coil, main board, wire harness) and a 30 day warranty
Update

Board went back to the software engineer to be re-tested.

They have received it and are testing the CPS of the solenoid with no load on it.

Target speed is 100cps



Hoping to have a video around the week of 10/10 or the week after.
You would take everything out of your frame so it was empty.

You re-install :

The lower board mount screw
The solenoid mount
The solenoid plunger with sear

You get:

A solenoid coil
Board
H.E.S.
Wire harness
All the parts to make the new board drop in and ready to go

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#8

11.11.2011 09:17

[swf width=560 height=340]http://www.youtube.com/v/5eZw6emHdFk[/swf]
UPDATE

I have the new board in hand.

I put it back into the X-Mag test frame and swapped out the battery for a fresh one.

( I just had 4 shots of JD for the Marine Corps Birthday,.. please excuse my spelling)

I powered up the board with a stock AGD battery and a KC 1000mHa battery,.. both work 100% with the new board.

I also tested the circuit on a 9volt battery, the circuit will 100% honor the lower voltage (for all you DIY guys out there)

I DO NOT RECCOMEND YOU USE 9VOLTS ON YOUR E/X-MAG!!!!

Below is a video containing the test of the software to the board and the battery.

Once I have completed the move into my new home on the 19th and 20th of Novermber, I will shoot a video with the new board installed in an AGD marker shooting paint.

For now,... enjoy!

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#9

30.11.2011 08:20

[swf width=560 height=340]http://www.youtube.com/v/gb2FFcwA1P8[/swf]

[swf width=560 height=340]http://www.youtube.com/v/Z3Fi1gwH89U[/swf]

Die Boards funktionieren soweit und können bald vorbestellt werden

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#10

05.12.2011 07:58

so die Boards sind fertig.
Im ersten run werden 100 Stück produziert.
Kosten 160$

für das was dabei ist, ist der Preis ziemlich fair
EFLEX PAINTBALL CUSTOMS
E-Mag/X-Mag Board

This is a completely new board that will replace the no longer available OEM boards

The board is a “drop in replacement” product (take the old one out, drop the new one in. Save all your old electronic parts.NO SOLDERING!!!!)

We made some changes to the current design to make it more up to date

The New Main Board Supports the following features:
A New ACE board (coming soon)
Break Beam/Bounce Beam Eye Systems
New HES trigger
Use the rear button as a power switch
Use the rear button as a mode/eye switch
Multi-color LED (no LED Screen)
AUX/Warp Feed Port
Solenoid Port (you can unplug your solenoid)
Power Port (you can unplug your power cable)
Solenoid Polarity Correction

The R.P.C. E/X-Mag Boards come pre-loaded with our Reflex 7.0 software.
With our advanced code driving your new board, you will push your AGD marker beyond its limits!

Reflex 7.0 Code supports:
(13) Fire modes = Semi (uncapped), Semi (capped), Auto Response, "Mild Ramp", "Max Ramp", "Z-Burst", Full Auto, CFOA, Millenium, PSP Auto Response, PSP Ramp, PSP Burst, NXL
Adjustable Trigger Debounce (checks trigger noise levels)
Adjustable Dwell (adjustment for your solenoid)
Adjustable Anti-Bolt Stick (adjustment for the bolt system)
Adjustable Ramp Rate (percentage of how fast to get to ramping modes)
Adjustable Ramp Start BPS (how fast you have to ACTUALLY shoot in order to start ramping)
MROF (the max rate of fire your marker will shoot when the board is turned on)
Adjustable Burst Value (works with "Z-burst" and "PSP Z-Burst". Changes the number of shots)
Eye Off ROF (the rate of fire you can get when the eyes are dirty or malfunctioning)
Eye Type (Break Beam or Reflective/ACE)
Adjustable Mechanical Debounce (checks marker noise levels)
Reset to Factory Defaults

When you Purchase a New Board it comes with:

(1) New R.P.C. E/X-Mag Main Board with Reflex 7.0 software
(1) New Power Cable (connects your battery to your board)
(1) New HES (the trigger switch)
(1) New Solenoid Coil (connects to your new board with connectors so you can remove it)

Optional Equipment Service Purchase:

A new Warp Feed Cable (made for both Left & Right hand shooters) = $15
A new ACE Board and Cable (coming soon) = $?????
A Complete Board Installation to your AGD lowers (you send in your lowers. We remove all your existing OEM electronics and install the new electronics for you) = $50
New/Upgraded Software Flash = $25
Custom Code Modifications = PM me

We are making 100 boards in the first run

We have set a price of $160 (shipping and insurance NOT included)
Das Warpfeed wird auch unterstützt

[swf width=560 height=340]http://www.youtube.com/v/z3ndwTGpqj8[/swf]

melden muss man sich hier
http://www.automags.org/forums/member.php?u=13779

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#11

26.01.2012 11:54

Für die X-Mag benutzer kommt sogar ein neues ACE Board

Bild

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#12

27.01.2012 00:20

I'm in :D
ASX05 hat geschrieben:wer baut das ? haben will !!! :hurra:
Was ist mit dir?

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Hellrox
Will hier nur verkaufen
Wohnort: Koblenz
Beiträge: 43
Registriert: 25.05.2011 19:45

#13

31.01.2012 21:37

werd mir auch eins holen :D
hat jemand erfahrung mit den ACE Boards ?
würd gerne wissen was für ne entfernung das reflectiv eye von der Paint haben muss um zu funktionieren, da ich mir das in nen MM Body bauen will, und da ist der aufbau etwas hoch :denk:

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#14

31.01.2012 23:23

Da gehts um ein wenige Millimeter. So 2-3mm sollten noch ok sein, darüber wird es schwierig.
Ich kann dir leider nicht sagen wie sich die Augenlogik bei dem Ace der X das verpackt, da der Ball hier eigentlich direkt auf dem Eye sitzt. Der Toleranzbereich darf da nicht zu groß sein - nicht das das Auge den Ball erkennt und den Schuss frei gibt obwohl der Ball noch nicht ganz vor dem Bolzen sitzt.

Ich hab es nur überflogen aber das neue Board kann auch Breakbeam (passt das der PE Modelle), wäre meine Wahl (auch wenn du dann Cover benötigst).

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Hellrox
Will hier nur verkaufen
Wohnort: Koblenz
Beiträge: 43
Registriert: 25.05.2011 19:45

#15

01.02.2012 17:40

war auch meine erste wahl, nur das bei einem MicroMag Body umzusetzten ist schwer und bring den nachteil das man die Kabel am Breech raustehen sieht wenn man den Body auf Sidefeed umstellt. Mit dem ACE Board hätte ich die möglichkeit die Löcher für das Auge auf allen Seiten zu bohren und nach bedarf dann mit Schrauben o.Ä zu verschließen, sieht auch schöner aus.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#16

15.02.2012 07:41

UPDATE ON THE NEW ACE BOARD

Here are the pictures of the proto-type

Bild

Bild

Bild

I will order the connectors tomorrow morning for the wire harness.
I thought I had some around here in the shop but I guess I was wrong.

If you noticed there is a hole missing, you are correct. It was much cheaper to drill the hole here than have the factory do it.

I will update again after we order the parts and get some soldering done.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#17

22.02.2012 07:51

UPDATE ON THE ACE BOARD

We started making some small changes to the foot print.

The v1.0 board will work just fine for testing purposes. Now we are looking at wire management before putting the board into production.

This is the v1.0 circuit with 2 small changes to make it v1.2

Bild

Once testing is done, we will send the proof out for manufacturing.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#18

09.05.2012 13:41


Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#19

05.01.2015 10:39


Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#20

05.01.2015 11:58

Wow, das das noch geklappt hat.
Hatte schon schwere Zweifel an dem Projekt

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#21

01.04.2015 10:29

Ich hatte die Hoffnung ja schon aufgegeben.
Nu ist es da. :rock:
Dateianhänge
rpc.jpg

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#22

31.07.2015 09:39

Ich hätte noch eins davon abzugeben. Inkl. Hall Sensor und Solenoid (Siehe Bild oben).
Bei Interesse PN.

Link:
BBcode:
HTML:
Hide post links
Show post links

Zurück zu „Andere Markierer“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 5 Gäste