eigene Beiträge| neueste Beiträge| ungelesene Beiträge| unbeantwortete Beiträge| aktive Themen| Fördermitgliedschaft| Cockerpage

J4 Paintball a new paintball company & gun --> Troque

Alles was oben nicht aufgeführt ist.
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#76

12.02.2015 06:28

naja, mal sehen, ob sie ihn gefunden haben
J4 on Facebook hat geschrieben:Okay, we killed the gremlin.
Normally the guns max out at about 205 psi on the regulator, and some people have had an issue with getting the velocity up. Embarrassingly, some haven't gotten over 250fps. With no good determinable reason at first. Then, lots of testing and checking. Profanity to match. Parts made with weird and varying degrees of result. Nothing has seemed to work, and this problem has been overwhelmingly counterproductive.
With the bolt adjustments, adding o-rings and adjusting the front tip fit, we have the results we want.
On one gun in here, running the guts I have from a 250fps customer gun, at 170psi I ran 288fps average. Without the volumizer. Over 310 fps was easy to dial in. With the volumizer we can run under 160psi.
We will do more testing over the week, but as of this moment the most frustrating, confusing, inefficient and pain in the *)&^$%, annoying problem has been found and is able to be fixed relatively easy. We are not sure on the total course forward, but finally we have THE fix.
This gun will now run very close to the prototype. We will play with a few variables but now that the major problem has been solved we can fine tune the rest with acceptable parameters.
TIme to move forward.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#77

08.09.2015 06:54

Die Probleme sind wohl von gestern.
Grosse Rückruf Aktion für alle J4 Guns

Alle Markierer sollen eingeschickt werden und werden vor Ort überarbeitet.
Krasse Aktion
J4 Paintball is doing a “Reboot” of their product line. In the process of that we will be updating all existing guns on the market to the updated status. That means ALL exisiting out in the market guns will be rebuilt to v1.1 specs. This includes any markers in our shop, Team or Tech guns.

Parts that needed to be remade have ordered and get into the shop in 3-4 weeks. The boards get in in about 8 weeks. Milling the Eye Mod takes about 2.5 weeks with shipping and turn around.

Since we have decided that we will rebuild ALL of the existing guns on the market as part of the reboot, that means in 3-4 weeks we need you to send in the guns. You can send now if you are interested.

If YOU have a Torque, no matter which number order you have owned it, they will all get a once over. Every single gun, no charge, full rebuild and tune plus the updates.

We will make sure they all get the ASA part upgrade, they will get the bolts, and we will fit test every one. We also will get the Eye board and in the end everything setup at that time.

If you have a gun send it into David at:

J4 Paintball, Tech Center West
Charlotte Paintball
6422 W. Wilkinson Blvd.*
Belmont, North Carolina 28012

Expect the first markers to take about 4 weeks (due to eye mod shipping).

If you have any questions please ask below.
Get them in for the Eye mod and the full update to v1.1:

UPDATES
ASA Pin
ASA Lever
Bolt
Eye Mod
Boards (if you need them)

This is Free! If you do need something else we will address it also.
If you didn't get the v1.1 upgrades, we will do it later, you do need to get the Eye Mod though, and they are done in batches.

Thank you very much,

J4

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#78

08.09.2015 11:58

Japp. Nach der gescheiterten "Kickstarter"Aktion haben sie wohl einen finanzstarken Investor gefunden.

Der nächste Run steht auch schon auf der Matte. Hoffentlich kriegen sie die Kurve. Wäre den Leuten dahinter schon zu wünschen. Wie sie das handlen ist durchaus einzigartig. Totale Transparenz.

Irgendwo hat Josh mal erwähnt das sie knapp 360.000$ Eigenmittel in dem Projekt versenkt haben. Um das wieder reinzukriegen müssen sie schon ein paar Tausend Guns verkaufen.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Woddy713
Podbitch
Podbitch
Wohnort: Berlin
Beiträge: 118
Registriert: 14.11.2012 13:09

#79

08.09.2015 13:46

Hoffe nur das sie dann auch nach Deutschland kommt. Würde mich echt freuen wenn das klappt.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#80

15.12.2015 16:34

hier geht ja gar nichts mehr:-(

Link:
BBcode:
HTML:
Hide post links
Show post links
frank19de
Mugger
Mugger
Wohnort: hinter eurem Sofa
Beiträge: 1331
Registriert: 07.12.2005 12:38

#81

15.12.2015 16:59

gibt es denn was neues ? wenn sich genug finden importiere ich auch das teil :)

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#82

16.12.2015 02:21

Irgendwas geht da, aber josh hält sich mit Infos ziemlich bedeckt. Es gab wohl einen großen investor aus der szene, und gerade wird run nr 2 gebaut.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#83

16.12.2015 06:40

mit Ruhm haben die sich ja nicht bekleckert.
Aber sie sind stehts bemüht.

Das wäre hier in Deutschland der GAU, welcher Händler will sich das ans Bein binden?

Link:
BBcode:
HTML:
Hide post links
Show post links
frank19de
Mugger
Mugger
Wohnort: hinter eurem Sofa
Beiträge: 1331
Registriert: 07.12.2005 12:38

#84

16.12.2015 07:15

einem dem das egal ist :)

Link:
BBcode:
HTML:
Hide post links
Show post links
farbi26
Rec-Baller
Rec-Baller
Beiträge: 379
Registriert: 18.04.2014 20:53

#85

16.12.2015 10:00

Also ich fände es geil wenn die doch noch kommt. Finde die total interessant. Endlich mal wieder ein interessanter rammer. Mehr verschiedene marker braucht das Land

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Chewy
Rookie
Rookie
Wohnort: Schlagloch-Citäy
ForumBadges: Bild
Beiträge: 424
Registriert: 09.08.2009 12:55

#86

16.12.2015 10:22

Is das nich n Spooler?

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#87

16.12.2015 10:22

icp-ms hat geschrieben:mit Ruhm haben die sich ja nicht bekleckert.
Aber sie sind stehts bemüht.

Das wäre hier in Deutschland der GAU, welcher Händler will sich das ans Bein binden?
Eben, dass kannst du mit unseren Regelungen zu Gewährleistung einfach nicht bringen.

Wenn doch kannst du nur hoffen, dass:

a) die Knarren mindestens 6 Monate absolut einwandfrei laufen (was sie anscheinend noch nicht tun)

b) man dem Kunden nach Ablauf von 6 Monaten die lange Nase zeigt sollte er ein Problem mit seiner Knarre bekommen (Beweislastumkehr). So wie es gerade aussieht hat der Kunde aber da jedoch die Bonuskarte, weil bekannt ist, dass der Markierer aus diversen Gründen ab Werk Probleme hat.

c) dem Kunden egal ist, dass seine Knarre nicht läuft und er sich ein Bastelobjekt gekauft hat. Das kann funktionieren! Dazu muss man nur auf die alten SmartParts Markierer und die unwissentlichen "Betatester" zurück blicken. Klar, vor 18 Jahren war die E-Pneumatik noch was Neues, da hat man in der Markierersteinzeit gerne über teilweise haarsträubende Sachen hinweg gesehen, ein paar hundert Mark in die Hand genommen und versucht das selbst als Käufer in den Griff zu bekommen. Bei ner neuen Gun :doh:
Die Ansprüche sind aber zum Glück gestiegen und man darf erwarten, dass man für teures Geld auch was bekommt was funktioniert.

Das ist alles Gift.
Für den Hersteller, für den Importeur, für den Wiederverkäufer, den Endkunden und die Geschäftsbeziehungen untereinander.



Die Gun ist ein interessantes Projekt (mal abgesehen davon, was man heute noch mit einem Stacked Tube Spooler möchte), aber das Marketing, was bis dato statt fand ist doch ein Albtraum.

Naja, Hauptsache sie haben schon mal das Design des Kartons fertig...

Bald ist 3 Jähriges Jubiläum. :party2:

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#88

16.12.2015 17:50

Die meinen ja, den Fehler gefunden zu haben.

Die offene Kommunikation war zwar peinlich aber interessant. Da sieht man mal in welche Schwierigkeiten man läuft wenn man alles anders machen möchte als alle anderen.

deshalb finde ich die cs1 auch so beeindruckend. hier wurde auch an ganz vielen ecken entwickelt, und am ende passt doch alles perfekt zusammen.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
xgambitx
Teilzeitarschloch
Teilzeitarschloch
Wohnort: Reichenbach
Beiträge: 2851
Registriert: 20.07.2009 10:12

#89

16.12.2015 18:09

...wie die alten Bauern sagen würden: "Ein tot geborenes Kalb!"

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
BillyTheKid
Sith-Lord
Sith-Lord
Wohnort: Heinsberg
Trusted Seller: Bild
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 5493
Registriert: 05.12.2009 13:27

#90

28.04.2016 11:08

Work has begun on customer guns. Hopefully shipping this week. Thanks for your patience
Bild

Bild

Bild

Bild

Bild

Quelle: FB_J4-Paintball

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#91

28.04.2016 11:38

Nice touch. Ick freu ma. Wird definitiv gekauft..

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
BillyTheKid
Sith-Lord
Sith-Lord
Wohnort: Heinsberg
Trusted Seller: Bild
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 5493
Registriert: 05.12.2009 13:27

#92

28.04.2016 13:19

wirds hier nicht geben ;)

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#93

28.04.2016 13:29

Gibt schon ein paar Läden die Interesse an einer Anmeldung bekundet haben...

Preislich ist die auch interessant. Sollte in der Standard Ausführung um die 850€ liegen.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Sputnik
Rookie
Rookie
Beiträge: 594
Registriert: 09.12.2003 20:15

#94

28.04.2016 13:42

Built by tatooed chicks... Klares kaufargument!

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Doogy 88s
Mugger
Mugger
Wohnort: Stade
ForumBadges: BildBild
Beiträge: 1258
Registriert: 26.04.2013 15:55

#95

28.04.2016 15:11

mich würden mehr Bilder von dem Mädel Interesieren :ätsch:

Link:
BBcode:
HTML:
Hide post links
Show post links
kaminkehrer
X-Baller
X-Baller
Wohnort: Würzburg
Trusted Seller: Bild
Beiträge: 4449
Registriert: 21.03.2010 22:14

#96

28.04.2016 15:56

Hübscher Hai.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Ceag
Podbitch
Podbitch
Beiträge: 106
Registriert: 15.06.2004 17:31

#97

23.05.2016 21:05

Gibt´s news, (ob) wann und wo die gun in Deutschland erhältlich sein wird?

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
Tombola
Semi
Semi
Beiträge: 876
Registriert: 08.03.2004 03:53

#98

23.05.2016 22:35

Glaube die reparieren noch den ersten Run von letztem Jahr. Der neue Run ist noch nicht verfügbar. Kommt aber wohl bald. Denke dann erst werden wir in D weiter sehen.

Link:
BBcode:
HTML:
Hide post links
Show post links
Benutzeravatar
RST
Tekkenman
Wohnort: FFM Airport
ForumBadges: Bild
XtraBadges:
zeigen
Beiträge: 2863
Registriert: 10.03.2003 15:35

#99

19.07.2016 00:48

Update:
State of the Gun update:

(Or maybe better labeled the State of David Update)

Hey guys, we need to be a bit forward here.

One: J4 is really small at the moment. David has a store and a field (Charlotte PB and Airsoft, and Behind Enemy Lines Paintball), and works 7 days a week at it. He has only taken 1 day off in months. He recently got a couple employees who can stay on task, not steal, and not take off for other work. He is also expanding the store, and expanded the days open at the field, so he is really busy.

I live 4 hours away. In addition to 5 kids and a wife I work 5-7 days a week, normally 70+ hours a week at a job with a 1 hour commute. This week I ended up out there all Saturday due to a problem, which canceled out going to BELPB as planned. Free time is fairly low on my side. Since I am not at the shop I can’t answer if your gun was shipped out or not.

2: We are doing J4 in between us at the moment as we train up some of the ChPB and BELPB guys. David works his backside off. I actually told him to not stay up to 5am prepping the floor at the new store because somebody else made a mistake working on it. Even then, he has been working on the floor of the store since Saturday and will be at it the rest for this week in addition to working on his store and field. This has kept him busy and kept him from being able to work on guns and work on email and such for all of you.

We have a shop at the field, where we have about 4000sft of space. It is about 45 minutes away from the store though, and while it has heat, it doesn’t have A/C. So when work permits, I drive 4 hours over for a day worth of work, David takes it off, and we get lil’ David and go to town on kit, then I drive 4 hours back. As David makes time during the rest of the week, he tears into it, or lil’ David will spend some time in between the store and his other stuff. There has been little time to work on this project ourselves, and right now it needs full time employees to take care of the current markers and start on the other. Even with David, due to the shop’s location, for an hours’ worth of work, which might be one gun, takes almost 3 hours. If he has to pick up a kid or runs for a tool or anything there is not much time left. It is best done on the weekends while running the field and while I am there. Right now the final guns are taking about an hour or more each, because we are dealing with problems that are not standard or apparent, and often need far more diagnosis or parts.

Until we sell some guns and can train up techs (Lil’ David being one) and pay them full time, this is NOT a full time business. It just can’t be. This is still out of pocket to some extent, and the work comes at the detriment to our other jobs and family.

Those are the problems. The solution is of course to open a larger store and find a local production shop and train up more employees.

So that is what we are doing right now.

Part of the reason David has less time now is the upgrade on the store. He is moving into a larger space just down from his current store, with double the square footage. Which seems like bad timing, but it has a purpose. We will have a dedicated service area to work on just J4 guns while running the store. So Big David or Lil’ David can tech guns while handing off kit at the store. In addition we are leasing property for new employees for full time J4 work that is minutes from the store and David’s residence. That location he will be looking at tomorrow, and if we like it we will be updating it right after the Store move. Running to look at that and setup takes time also, but will allow us to far better handle our time and your guns. The store will have a dedicated tech shop for repairs, and J4 is setting up a new shop (with A/C) for production.

But it is hard to take care of emails, and we have lost some in the mix. I haven’t had answers to the question of whether your marker is shipped out or not, or tracking. David hasn’t had the manpower to answer emails either. It might not look like it, but we are as busy as we can be on this, while not pissing off our spouses. Well, okay, we have pissed them off to no end already, but we continue to do so at the pace we think we can justify.

We are still here though. We have stayed ‘open’ and are working on resolving all of the issues as they come up. David and I would love to be able to spend 40 hours a week, or far more, on just J4. As it is at the moment, we cannot do that with the current infrastructure. We can’t even communicate all of what we are doing, nor keep up with emails at the pace we feel is responsible. That IS changing though.

We will have the larger store opening in a week or two. We could have property leased for the Shop within 2-3 days. And we have employees now that relieved David enough that he can expand the store and find a Shop, and he will be able to put far more time into J4. I have more time available and some PTO so I might start making time.

We should be able to get back to emails and such this week. We will access everything again here again soon. Gun count, last problems, and anything else when we have this done.
Quelle: J4 FB

Link:
BBcode:
HTML:
Hide post links
Show post links

Zurück zu „Andere Markierer“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste