pbhub.de Paintballforum

Modes - Rate of Fire
The 2005 FS-8 features Predator LTD Programming available through TAG Sportz. This feature is a limited version of the Preda- tor series of programs. For more information on the programming capabilities of the full software version, or other products offered by TAG Sportz, please visit their website at www.tagsportz.com.

TABELLE SIEHE ANHANG

To enter program mode the tournament lock (if available on your board) must be off. Turn the marker on with the trigger pulled. The next set of pulls takes you to a register. Example: turn marker on with trigger pulled and wait 2 seconds. Pull trigger 2 times to go into rate of fire register.
The board will now tell you what the current rate of fire is by flash- ing the current setting. After this you can enter the new setting. Once this is done the board will flash 2 times to let you know it took the new setting.
1. Turn gun on with trigger pulled. 2. Gun will flash to let you know you are in program mode. This indication usually takes about 2 seconds. 3. Pull the trigger to go to a register. 4. Gun will flash current settings for that register. 5. Enter the new setting by pulling the trigger. Example: if you want a ROF of 20, pull the trigger 20 times once you are in register 2. 6. The board will flash 2 times to let you know it took the new set- ting. 7. You are now back in the register column. 8. Pull the trigger to go to the next register. Example: if you wish to go to register 8, pull the trigger 8 times.