eigene Beiträge| neueste Beiträge| ungelesene Beiträge| unbeantwortete Beiträge| aktive Themen| Fördermitgliedschaft| Cockerpage

Freestyle: Technische Resourcen, FAQ, Ups etc.

Bushmaster, Freestyle, Promaster
Bild

Benutzeravatar
icp-ms
Rain Man
Rain Man
ForumBadges: BildBildBild
XtraBadges:
zeigen
Beiträge: 10692
Registriert: 14.03.2005 17:56

#21

27.09.2011 08:14

Pred Lite Settings

Bild
Turn the board on with the trigger pulled, The next set of pulls takes you to a register.
Example:
Turn the board on with the trigger pulled in, wait 2 seconds. Pull the trigger 3 times to take you to the DeBounce register. The board will now tell you what the current DeBounce setting is by flashing the current setting.
After the board has told you the setting your on, You can now enter a new setting. Once this is done the LED will then flash 2 times to tell you its accepted the new setting.

Programming Steps:
1. Turn the marker on with the trigger pulled
2. Board will flash to Indicate your in program mode
3. Pull the trigger to go to a register. The board will flash current setting
4. Enter a new setting by pulling the trigger the corresponding number of times
5. Board will flash 2 times to let you know its accepted the new setting
6. Turn the board Off then follow steps 1-5 to change other settings

Eye functions:
To over ride the PDS *Turn the EYES off* Hold the trigger down for 2 seconds when the board is in firing mode
Solid Led = PDS ON
Flashing Led = PDS OFF

Link:
BBcode:
HTML:
Hide post links
Show post links

Zurück zu „Indian Creek Design“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast